Diecast Model Vehicle
Diecast Model Vehicle
|
|
Days Gone Chevron Die Cast Vehicles, Ford V-8, Chevy Van, Model A Refinery Bus $19.99 |
|
|
Toys Trucks Vehicles Die Cast CHEVRON Commemorative Model 6 Wheel RARE 1997 NIB $14.00 |
How to Apply Water slide Decals by vmfa
How To Apply Water Slide Decals
Instructions Provided by Diecast and Decals
To apply your decals please do the following.
1.Supplies you will need are a pair of scissors, tweezers, a good artist paintbrush, Kleenex (I do mean Kleenex – do not use a generic brand) and a bowl of warm water.
2.Cut out around the decal name leaving the smallest practical border around the edge of the lettering.
3.Place your vehicle on a towel with the side up you are placing the decal facing up.
4.Place your decal in a bowl of warm to very warm water UPSIDE DOWN with the backing paper facing up. Leave it soak 30-60 seconds. Pick it up with the tweezers (gently-you do not want to make impressions on the film) and turn it so the lettering is facing you.
5.Wet the area you are placing the decal on (just dip your finger in the bowl and blob some water where you are placing the decal) Then take the decal with the backing paper and place it where you want to apply it with the film side up and the backing paper next to the model. Using one finger move the film to the left slightly until you can grab the backing paper with the tweezers and pull the backing paper out from under the film. (I always slide the film to the left and leave my finger on the left edge of the film while pulling the backing paper to the right)
6.Adjust the film where you want it and take a Kleenex (I do mean Kleenex-no other brand works as well) and gently blot the excess water up around the decal. Double check the position of the decal to make sure that is where you want it. If it is not ideally located you can move the film around to get it in the proper place at this time.
7.Take your artist brush starting in the center of the decal and brush outward removing the water from under the decal. (I then take the Kleenex and blot up the water I have pushed out from under the decal) Continue doing this process until no more beads of water come out from under the decal.
8.If you find your decal is not centered exactly where you want it soak it liberally in water using your artist brush and you can tease it to release and reposition it. (Until you get most of the water out from under the decal you will be able to reposition it without re-soaking it)
9.Let the decal dry for a day. To protect the decal I suggest you coat it with acrylic using a Q-tip and Future floor wax. This puts an iron like coating over the decal protecting the micro thin printing.
10.If you do not wish to attempt to do this (and it is really is simple once you do it you will find out) you can ship your model to me and I will apply the decals for Ten dollars plus shipping back to you.
11.If you encounter a very rare occurrence that occasionally happens, after you get your decal applied it looks like bubbles or spots between the film and what you applied it to the film did not completely adhere. This happens on rare occasions. Go to your local hobby store and purchase a decal setting solution (I use Microsol – .Micro Set) Liberally apply the setting solution over the decal and after 3 minutes gently brush outward from the center. This will resolve the problem and your film should be very transparent and unnoticeable.
12.
Diecast and Decals
Joseph Schulte
103 Seneca Ave.
Cridersville, Ohio 45806
419 645 4706 email:schulte@bright.net
http://www.diecastanddecals.com
13.If you have questions to do not hesitate to email me (the best way to reach me as email is checked daily) or call me.
http://www.diecastanddecals.com
Article Source: http://www.earticlesonline.com/Article/How-to-Apply-Water-slide-Decals/259959
|
|
Days Gone Chevron Die Cast Vehicles, Ford V-8, Chevy Van, Model A Refinery Bus $19.99 |
|
|
Toys Trucks Vehicles Die Cast CHEVRON Commemorative Model 6 Wheel RARE 1997 NIB $14.00 |
|
|
NIB REMINGTON Country Bank 1912 Ford Model T Ltd Ed Goodyear Tires Die Cast $7.50 |
|
|
15. Ertl Die Cast Bank Domtar Gypsum Gyproc 1913 Model $14.99 |
|
|
FORD MODEL A QUAKER STATE RACING #3592 Die Cast Bank $30.55 |
|
|
Die cast Agway truck/ bank; 1918 Ford Model T Runabout $7.75 |
|
|
Rescue vehicle wiAerial sound and light Diecast model $10.50 |
|
|
1/72 BTR-80 military vehicle Die Cast model & 5 Magazine Russian Tanks $29.99 |
|
|
VINTAGE BULGARIA ARMOURED VEHICLE MODEL DIECAST TOY $47.00 |
|
|
Maisto 1:18 scale model “Dodge Concept Vehicle” $7.99 |
|
|
DeHanes Models, Fire Vehicle, Limited Edition Handcrafted in USA $59.00 |
|
|
TEXACO METAL DIE CAST 1912 FORD MODEL T REPLICA BANK $17.95 |
|
|
Ford Model “A” Van. Bank. True Value. 2nd in a series. Die-cast metal $10.00 |
|
|
SHELL – 2x BOXED MERCEDES BENZ 500 SL (ONE IS A CONVERTIBLE) MODEL CARS VEHICLES $3.16 |
|
|
RARE ERTL Co. J.C.Penney Co.Bank DIECAST 1913 FORD MODEL T VAN REPLICA RED/WHITE $9.00 |
|
|
HO 1:87 Scale 6 PIECE VEHICLE SET – DIE CAST New Sealed Package Model Power IHC $22.99 |
|
|
DIE CAST 1:87 EXCAVATOR CONSTRUCTION VEHICLE MODEL $13.90 |
|
|
Liberty Classics 1/25 Scale Diecast Model A Delivery Van Lockable Coin Bank $24.95 |
|
|
Husky Commer Walk-Thru Van vintage Diecast model vehicle Made in Great Britain $11.00 |
|
|
Die Cast Heinz Model A Pickup Truck Bank $14.99 |
|
|
Close-up of some old toy cars Photo Mugs Close-up of some old toy cars…. |
|
|
Set of 4 cars: 5 Mini Cooper S 1/28 Scale $19.96 Set of 4 Mini Cooper S 1/38 Scale (5″), pull back action. Color assortment: Green, Red, Yellow and Turquoise (1 of each)…. |
|
|
Box of 12 Buses: 5 Classic Yellow School Bus, Pull Back n Go Action. $27.96 Box of 12 Buses: 5″ Classic Yellow School Bus, Pull Back n Go Action…. |
|
|
Set of 4 Cars: 5 Range Rover Sport SUV 1/38 Scale $19.95 Set of 4 Cars: Pull Back Action… |
|
|
Pyle PLMCA60 Motorcycle/ATV/Snowmobile Mount Amplifier with Dual Handle-Bar Mount Aluminum Diecast Weatherproof Speakers $308.99 Pyle plmca60 cycle series motorcycle stereo system with dual handlebar speakers…… |
|
|
Rockford Fosgate Punch P3 P3SD210 Punch P3 10-Inch 300 Watt Shallow Subwoofer – 2 Ohm $119.99 The Rockford Fosgate P3 12-inch Shallow Mount subwoofer delivers the Punch–even in depth-limited mounting situations. All vehicles are not the same: some can accommodate deep subwoofers and some can’t. In the past that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass and the Dual Voice Coil allows configurations for every application. Shallow woofers are designed … |
|
|
Pyramid 3808 400 Watts 3Way Mini Box Speaker System $26.34 200 watts peak power – frequency response: 80-20khz – 4 ohm impedance – rubber air suspension woofer – 4 woofer/2 mid/1 tweeter – ferro fluid enhanced voice coils – aluminum die cast cabinet – complete mounting kit & wires – dimensions: 4-1/4h x 7-3/8w x 4-1/4d – sold in pairs…… |
|
|
Encyclopedia of Matchbox Toys (Schiffer Book for Collectors) $18.54 It’s all here! Fifty-four years of toys! The toys pictured and listed in this book represent the immense volume of items produced from 1947, when the Matchbox company was founded, to mid-2001, including their popular diecast vehicles along with playsets, dolls, plastic kits, robots, and ephemera all in one massive volume–now in its third edition! The international scope of Matchbox toys is illust… |
|
|
Matchbox Toys 1947 to 2003: Identification & Value Guide (Matchbox Toys: Identification & Value Guide) $8.50 Our fourth edition promises to be the most user-friendly Matchbox collector’s guide ever produced. While most publications on this subject are organized by model number or year of introduction, this book is arranged alphabetically by model name and description. Well over a thousand photographs are included in this latest edition, with multiple variations pictured of selected models, all incorporat… |
|
|
BMW GS: Adventure Motorcycle: A 30 Year Catalog $50.00 A complete technical, model-by-model, history of BMW’s most popular motorcycle: the machine that invented the modern adventure touring activity…. |